Filter
Top Products
ViewStation EX User Guide
294 www.polycom.com
❑ Allow Dialing—Enable this option to allow users to place calls
from the system. If this option is disabled, the system can only
receive calls. You can still place calls from the Web interface.
❑ Display IP and ISDN Information—Select this option if you
want your system’s IP address and ISDN numbers displayed on
the main user interface for ease of use. If your system is IP only,
registered with a Gatekeeper, and has a Gateway number, this
number is displayed as your ISDN number on the main screen.
This option is enabled by default.
❑ Maximum Time in Call—Enter the maximum number of
minutes allowed for call length. When that time has expired in
a call, you see a message asking you if you want to hang up or
stay in the call. If you do not answer within one minute, the call
automatically disconnects. If you want your call to stay up
indefinitely, delete the time setting in the Maximum Time in
Call field. Make sure to do the same on all videoconferencing
endpoints in that call so that the call never times out.
❑ Allow User Setup—This option is used to enable or disable the
User Setup icon on the System Info screen. Administrators can
use this option to prevent users from changing the User Setup
functions.
❑ Allow Address Book Changes—If this option is enabled, then
the user has access to the New, Edit, and Delete icons in the
Address Book screen.
❑ Keypad Audio Confirmation—This option enables an audio
response (English language) when a numeric key is depressed
on the remote control.
❑ Display Speed Dial—This option allows you to disable the
Speed Dial screen. When it is disabled, you access the Address
Book directly.
❑ Screen Saver Wait Time—This option allows users to set the
system screen saver sleeping time. The default is 15 minutes.