Filter
Top Products
1
Unpack Your Publisher
• Optical Disc Publisher
• Gray Plastic Input and Output Bins
• Power Cord
• One Three-Color (CMY) Ink Cartridge
• One Monochrome Black Ink Cartridge
• QuickStart Installer Disc
• USB 2.0 Interface Cable (Beige)
• Warranty Card
• This Operator's Manual, Quick Start Guide
and Other Printed Information
Save the carton and packing materials. They
will come in handy later if you ever need to
transport the Publisher and/or any of its parts
and accessories.
1. Place the Installer CD in your
CDRom Drive. The Installer
application will automatical-
ly launch in a few moments.
2. You may follow either the
steps shown in this Quick
Start or the steps shown in the installer to
complete the installation.
Note: If the Installer does not start, open My
Computer on your desktop. Double-click the
icon of the appropriate CD drive containing
the Software Installer disc. Double-click
Setup.exe.
Installing the Software
PC
4
Loading Media (Discs)
Mac
1. Insert the Bravo
Installation CD-ROM in
your system's CD-ROM
drive.
2. Double-click the
CD-ROM icon.
3. Double-click on the Disc Publisher
Installer.mpkg file icon. Follow the on-screen
instructions.
5a
Installing the Printer Driver (Windows XP)
Connect the Publisher to your PC with your beige USB 2.0 Cable.
After a few moments, Windows will tell you it has found new hardware
and is looking for software to install it.
Select "Install the software automatically" and follow through the wizard to
complete the installation.
You will be prompted that the software has not passed Windows Logo Testing. You must click Continue
Anyway to finish the installation.
Applying Power
Important! Be sure you have removed the packing
tape and cardboard shipping insert before applying
power.
• Locate the power cord supplied with your
Publisher.
• Plug the adapter into a surge protected outlet,
and plug the power plug into the power port
on the rear panel of the Publisher.
• Turn on the power switch. Wait for the LED
lights to stop flashing (30 seconds).
2
3
NOTE: Your Publisher can print directly onto virtually any
brand of inkjet printable-surface CD/DVD media.
Due to the wide variety of printable-surface CD/DVD
media, you may find that certain brands of discs provide
higher print quality than others. For maximum print
quality, use CD/DVD media authorized by Primera.
Refer to the following steps when loading discs in
to the Publisher:
• Open the front cover of the Publisher
• The Publisher will automatically position the
cartridge carrier and Robotic Disc Transporter
to the center position allowing for easy access
to the bins.
• Load the Input Bin (the bin located on the
right-hand side of the Publisher) with up to
50 blank discs and place the bins on the
mounting pegs.
Open Cover
5b
Installing the Printer Driver (Windows Vista/Windows 7)
Click the "Install Driver" button when prompted to
do so by the installation disc.
Files will begin to copy to your hard drive.
You will be prompted that Windows can't verify the
publisher of this driver software. Click Install the
driver software anyway.
Finally, connect the Publisher to your PC with your
beige USB 2.0 Cable.