Filter
Top Products
Demand Printing B–5
Form Saver Mode
The Form Saver Mode does not require any special forms or applications.
Instead, the printer determines the proper motion to allow demand printing with
the least amount of lost forms. Only the form length needs to be set.
When the VIEW/EJECT key is pressed, the printer slews the bottom of the last
printed form to the tear position. When the VIEW/EJECT is pressed a second
time, the paper reverses to the top of the first possible form available for printing.
This mode may act differently depending on the form length. In all cases, the
printer has the intelligence to keep form loss to a minimum.
Page
1
Page 2
Page 1
First Line
......
Last Line
Page 2
Long
Form Example:
The
user loads paper and sets T
op of Form.
Hence, the printer is ready to print at the first line.
Print forms.
T
ear Position
Print Position
T
ear Position
Print Position
Short
Form Example:
The
user loads paper and sets T
op of Form.
Page
1
Page 2
Tear
Position
Print Position
Page
1
Page 2
Page 3
Print Line
Tear
Position
Print Position
Print forms.
Page
1
Page 3
Page 4
Page 5
Page 2
Print Line
Tear
Position
Print Position
Slew