Filter
Top Products
RFID Label Guide Specification
Gen 2, Rafsec Short Dipole Antenna
182316-000 Rev C Page 5 of 5
Figure 1. Label Layout
All Dimensions in Inches
Printronix RFID Label Requirements for
Rafsec Short Dipole Inlay
Viewed from Facestock Side
1.0" min x 0.125"
timing mark on
back side of liner
Direction of label
travel out of
printer
1.00" (+/-0.125")
Trailing edge of timing
mark to leading edge
of antenna
2.0625"
(+/- 0.1250")
Liner edge to
center of chip
Label Perforation
Centered in Gap
(see Para 3.4)
Leading Edge of Label
Minimum
Pitch 2.0"
Liner
Label
Inlay Outline
Rafsec Short Dipole
Antenna outline
Chip facing down,
center slot back
PRINTRONIX
4.0" minimum
Corner radius:
0.125" typ.
Variable see para
3.7.2 and 3.7.3