Filter
Top Products
Chapter 2 RFID PGL Commands
30
~CREATE;SGTIN–96;432
RFWTAG;96
8;B;*00110000* /Header
3;D;*5* /Filter Value
3;D;*6* /Partition
20;D;*123456* /Company Prefix
24;D;*7777777* /Item Reference
38;D;*123456* /Serial Number
STOP
END
~EXECUTE;SGTIN–96;1
~NORMAL
RFRTAG
Purpose To read the content of an RFID tag (embedded in a
smart label) into a dynamic field. This command cannot
be mixed with the RFREAD command.
Mode CREATE
Format RFRTAG;
size
(
Bit Field
)+
STOP
RFRTAG Specifies the RFRTAG command, enter
RFRTAG;
size
A decimal number specifying the overall
bit length of the RFID tag.
Bit Field
A line description of a bit field; must have
one of the following syntax formats:
length
;DF
n
;
format
length
A decimal number
specifying the bit length
of a field within a tag. The
maximum length is 64
bits.
DF
n
Indicate dynamic data
field to store the read
result. Replace
n
with a
number ranging from 1 to