Filter
Top Products
FCC STATEMENT
32
This equipment complies with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC rules. Only peripherals (computer
input/output devices, terminals, printers, etc.) certified to comply with the Class A limits may be attached to a computer that complies with Class A limits.
When connecting to a peripheral device, a shielded input/output cable is required to ensure compliance with FCC rules. The shielded cable that must be used is supplied
with the equipment. Operation with non-certified peripherals or non-shielded cables is likely to result in interference to radio and TV reception.
This equipment generates and uses radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio and
television reception. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of
the FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient the receiving antenna.
• Relocate the projector with respect to the receiver.
• Plug the equipment to a different outlet so that equipment
and receiver are on different branch circuits.
• Fasten cables using mounting screws to ensure adequate EMI control.
You may require the following booklet from the Federal Communications Commission (FCC): "How to identify and resolve radio and TV interference problems", available
from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4.
O
C9 UG HB.qxd 10.10.2001 09:39 Page 30