Filter
Top Products
5
2. Quick Installation
You may follow the quick installation and configuration steps if
all of the following conditions are true:
❑ You will use all of the software default values.
❑ You are using two (2) RangeLAN2 Serial Adapters as a
replacement for an RS-232 cable.
❑ You are using no more than nine (9) pairs of Serial
Adapters in one location.
Follow the steps below to install two RangeLAN2 791x Serial
Adapters:
1. Firmly screw the antenna onto its connector in a clock-
wise rotation. The antenna connector is located on the
side of the unit as shown in Figure 2.
Note:
Government regulatory agencies mandate that the an-
tenna not be alterable. Therefore, the RangeLAN2
Serial Adapter uses a custom antenna connector. Do
not attempt to use a non-certified Proxim antenna or
you may damage the connector and the Serial Adapter.