PYLE Audio PDBC10 Power Supply User Manual


 
OPERATION NOTICE
Thank you for buying our product. Please take a few minutes to read these
operating instructions. These instructions have important product information,
explaining the features and operation
of
your unit. Please retain these
instructions for future reference.
1.
Be sure that the line voltage
of
your
outlet
isAC
IIOV/60HZ or 220V/50HZ.
If
you aren't sure, consult your appliance
dealer or local power company.
2.
Protect the voltage line: Avoid putting pressure
on the line. Do not push or pull the line too hard.
3. Do not cover the vents: this product uses vents
to keep the temperature
of
the components
low.
Covering the vents will damage the unit.
4. Avoid water, dust, and moisture. Keep the unit
dust free and do not place liquids on or near the unit.
5.
Avoid putting the unit
in
low temperatures.
Keep the unit
in
a room where the temperature is
above
40 degrees Fahrenheit.
6.
Make sure your unit is exposed to air -- do not
operate it in a smaller container
or
near a heater.
7.
Do not drop metal in the unit. This could
cause a short-circuit and damage your
equipment.
8.
Do not open this unit. There are no
user-servicable parts inside.
Please contact
qualified personnel
if
your unit
is
not
functioning.
9.
Do not clean with volatile solutions. Do not
use alcohol, paint, or gasoline on this product.