PYLE Audio PLINV1 Power Supply User Manual


 
SYMPTOM C: THE LOW OUTPUT OF INVERTER IS MEASURED
7
POSSIBLE CAUSES SUGGESTION
Battery voltage is too low below 10V DC Recharge battery
The inverter is overload Reduce load to 150 Watts (PINV1) , 300
Watts (PINV2) and 400 Watts (PINV3)
maximum to maintain regulation.
SYMPTOM D: THE LOW BATTERY IS MEASURED
POSSIBLE CAUSES SUGGESTION
The poor battery condition Recharge battery
Inadequate power of excessive voltage drop Check condition of battery clips and
terminals. Clean or replace as necessary