Filter
Top Products
2 – QLA2310F/2310FL
QLA2310F/2310FL HBA Components
2-2 FC2354603-00 A
Q
Figure 2-2. QLA2310FL HBA Layout
2.1.1
LEDs
Figure 2-3 identifies and describes the activity of the QLA2310F/2310FL HBA LEDs.
Figure 2-3. QLA2310F/2310FL HBA LED Activity
2.1.2
Jumpers
The J2 jumper on the QLA2310F/2310FL HBAs set the default state of the laser
and are set at the factory with a jumper plug on pins 2–3.
CAUTION!
Changing the jumper setting can result in the HBA being inoperable.
LED
J1
ISP CHIP
31
J2
NOTE: The serial number is on the other side of the HBA.
GREEN LED
AMBER LED
Green LED Amber LED Activity
Off Off Power off
On On Power
On Off Online
Off On Link established
Off Flashing twice per
second
Loss of
synchronization
Alternate flashing
twice per second
Alternate flashing
twice per second
Firmware error
CONNECTOR