Filter
Top Products
Multi-Path support
HP OpenVMS
Native
Windows
Microsoft MPIO
Linux
Device Mapper
Sun
MPxIO
VMware
Native software MPxIO
Max. Pending Commands
Default value of 64.
Host Interface
Uses standard TCP/IP connection, RJ45 connector
Distance
GbE Copper, CAT-5e or CAT-6, twisted pair
Host Platform Support
Any 32-bit or 64-bit servers running the supported OS
Performance
half duplex
>30,000 > 200 MB / Sec
full duplex
> 360 MB / Sec
Maximum Host
Connection Design Limits
for iSCSI
*
Architectural Limits
256 connections per iSCSI port
mpx100b is limited to 16 iSCSI initiator ports in base unit. License upgrades
are available in two steps, a 32 initiator license followed by an unlimited
license up to the HP supported maximum.2 FC target ports, with maximum
initiators
* Please see the product user guide available on the Storage Networking
product page and the SAN Design Guide for latest tested and supported
configurations located at:
http://www.hp.com/go/sandesignguide
.
Installation
InstallationInstallation
Installation
User installable, but recommended field service install
Environmental
EnvironmentalEnvironmental
Environmental
Specifications
SpecificationsSpecifications
Specifications
Optional side-by-side 1U rack mount kit
Non-cable-side to cable-side airflow; power from cable-side; 1U, 19-in. EIA rack-compliant
Cooling: Two fans with back-to-front airflow
Condition
ConditionCondition
Condition
Environment
EnvironmentEnvironment
Environment
Operating
OperatingOperating
Operating
1
Non Operation
Non OperationNon Operation
Non Operation
2
Temperature
TemperatureTemperature
Temperature
5° to 40° C
(41° to 104° F)
-25°C to 70° C
(-40° to 158° F)
Humidity
HumidityHumidity
Humidity
3
5 to 90%, non-condensing 5 to 93%, non-condensing
Altitude
AltitudeAltitude
Altitude
3 km
15 km
Shock
ShockShock
Shock
IEC 68-2, 4g, 11ms, 20 repetitions
IEC 68-3, 30g, 292 ips, 3 repetitions,
3 axis
Vibration
VibrationVibration
Vibration
4
IEC 68-2, 5-500Hz, random, 0.21G
rms, 10 minutes
IEC 68-2, 5-500Hz, random, 2.09G
rms, 10 minutes
Power AC input Nominal
Power AC input NominalPower AC input Nominal
Power AC input Nominal
Power AC input Nominal: 0.5A@100-125 VAC 0.25A@200-240 VAC
Frequency Range
Frequency RangeFrequency Range
Frequency Range
47 to 63 Hz
Nominal Frequency
Nominal FrequencyNominal Frequency
Nominal Frequency
Range
RangeRange
Range
50 Hz to 60 Hz
Power Dissipation
Power DissipationPower Dissipation
Power Dissipation
48W maximum (optics included)
1
Environmental specification for operating condition should be satisfied before the iSCSI Connectivity
Option subsystem is powered on. Maximum temperature of 40°C should be strictly satisfied at air inlet
portion.
2
Non-operating condition includes both packing and unpacking conditions unless otherwise specified.
3
No condensation in and around the iSCSI Connectivity Option should be observed under any
conditions.
4
The above specifications of vibration are applied to all three axes.
On shipping/storage condition, the product should be packed with factory packing.
QuickSpecs
HP StorageWorks EVA iSCSI Connectivity Option
HP StorageWorks EVA iSCSI Connectivity OptionHP StorageWorks EVA iSCSI Connectivity Option
HP StorageWorks EVA iSCSI Connectivity Option
Technical Specifications
DA - 12413 Worldwide — Version 10 — June 19, 2009
Page 10