Filter
Top Products
7
4. Presenting LUNs to iSCSI Initiator
Press the “Refresh” button to refresh the display of SANsurfer. Now you should see the iSCSI initiator
names under the tab of Discovered Initiators. Run the LUN presentation Wizard to assign a LUN(s)
to a server(s).
Now invoke the “Presentation Wizard” from the pull down menu for Wizards. This Wizard allows you
to map a LUN to the iSCSI initiator on your server. The screen that allows this mapping looks as follows:
Save the mappings using your management password. Refresh the display for SANsurfer Router
Manager. Now, when you select your iSCSI initiator on the LHS of the display, you should be able to
see the LUNs mapped to that initiator as follows:
Now, go back to the Windows Server Screen and Select “LogOn” to log on to this target, and you
should see the status change from “Inactive” to “Connected”.
Congratulations! You have now successfully installed your QLogic
SANbox 6140, as well as mapped target LUNs to iSCSI initiator on your
server. Your server should now be able to see the Fibre Channel LUNs via
the server’s volume manager.