Q-Logic 9200 Switch User Manual


 
SANbox 9000 Series Stackable Chassis Switch HyperStack Cable Installation Guide
59238-01 A 3
D
Install version 7.8 firmware, if necessary. Enter
the Image command to download and unpack
the firmware. Enter the Hotreset command to
perform a non-disruptive activation.
SANbox #> admin start
SANbox (admin) #> image fetch account_name ip_address
filename
SANbox (admin) $> image unpack filename
Wait for the unpack to complete.
Image unpack command result: Passed
SANbox (admin) $> hotreset
Install HyperStack Licenses
Follow the directions on the License Key
Upgrade document for each switch. Apply the
respective license keys to each switch using the
Feature Add command.
SANbox #> admin start
SANbox (admin) #> feature add #-XXXXXXXXXXXXX
License upgradefor HyperStack(tm) capability.
This feature upgrade does NOT require a switch reset.
Do you want to continue with license upgrade
procedure? (y/n): [n] y
Log Msg: [day mon date hh:mm:ss.sss CST
year][C][8400.006B][Switch][Upgrading License for
HyperStack(tm)capability]
Log Msg: [day mon date hh:mm:ss.sss CST
year][C][8400.0047][Switch][New licenses are being
installed]
Connect the HyperStack
Cables
Use a screwdriver to remove the covers from all
ICC ports.
Connect a HyperStack cable to one of the ICC
ports with the label side up as shown.
Secure the cable connector with the captive
screws.
1. ICC Port Cover 2. Label facing up
1
2