Q-Logic ISR6140 Network Router User Manual


 
7
4. Present LUNs to iSCSI Initiator:
a. Click the Refresh button to refresh the SANsurfer display. The iSCSI initiator names should
appear on the Discovered Initiators tab.
b. Run the LUN presentation Wizard to assign a LUN(s) to a server(s).
c. Launch the Presentation Wizard from the Wizards drop-down menu. This wizard allows you to
map a LUN to the iSCSI initiator on your server. The screen that allows this mapping looks as
follows:
d. Save the mappings using your management password.
e. Refresh the SANsurfer Router Manager display. Now, when you select your iSCSI initiator on
the LHS of the display, you should be able to see the LUNs mapped to that initiator as follows:
f. Return to the Windows Server screen and select LogOn to log on to this target. The status
should change from Inactive to Connected.
Congratulations! You have now successfully installed your QLogic
iSR6140 and mapped target LUNs to iSCSI initiator on your server. Your
server should see the Fibre Channel LUNs through the server’s volume
manager.