Filter
Top Products
StorNext File System Tuning
The Metadata Controller System
StorNext File System Tuning Guide 15
The “PERF: VFS” trace shows throughput measured for the read or write
system call and significant aspects of the I/O, including:
•Dma: DMA
•Buf: Buffered
• Eof: File extended
• Algn: Well-formed DMA I/O
• Shr: File is shared by another client
• Rt: File is real time
• Zr: Hole in file was zeroed
Both traces also report file offset, I/O size, latency (mics), and inode
number.
Sample use cases:
• Verify that I/O properties are as expected.
You can use the VFS trace to ensure that the displayed properties are
consistent with expectations, such as being well formed; buffered
versus DMA; shared/non-shared; or I/O size. If a small I/O is being
performed DMA, performance will be poor. If DMA I/O is not well
formed, it requires an extra data copy and may even be broken into
small chunks. Zeroing holes in files has a performance impact.
• Determine if metadata operations are impacting performance.
If VFS throughput is inconsistent or significantly less than Device
throughput, it might be caused by metadata operations. In that case,
it would be useful to display “fsmtoken,” “fsmvnops,” and
“fsmdmig” traces in addition to “perf.”
• Identify disk performance issues.
If Device throughput is inconsistent or less than expected, it might
indicate a slow disk in a stripe group, or that RAID tuning is
necessary.
• Identify file fragmentation.
If the extent count “exts” is high, it might indicate a fragmentation
problem.This causes the device I/Os to be broken into smaller
chunks, which can significantly impact throughput.