Filter
Top Products
Airborne Control Center
Page 36 AirborneDirect™ Ethernet Bridge User's Guide 100-8007-141G
Quatech, Inc. Confidential
Wireless Security Settings
Wireless Security Mode
Enables or disables wireless security:
• Disable – Disable any security (default)
• WEP64 – 64-bit key length (11 ASCII
characters)
• WEP128 – 128-bit key length (26 ASCII
characters)
• WPA-PSK - WPA with preshared key.
Requires preshared key
• WPA-LEAP - WPA with 802.1x (LEAP)
authentication. Requires LEAP
username and password
• WPA-LEAP64 - WPA with 802.1x (LEAP)
authentication, and using "WPA
Migration Mode" (static 64-bit WEP
key is used for broadcast and
multicast traffic)
• WPA-LEAP128 - WPA with 802.1x (LEAP)
authentication, and using "WPA
Migration Mode" (static 128-bit WEP
key is used for broadcast and
multicast traffic)
•
WPA-PSK64 - WPA with preshared key, and
using "WPA Migration Mode" (static
64-bit WEP key is used for broadcast
and multicast traffic) Requires
preshared key.
•
WPA-PSK128 - WPA with preshared key, and
using "WPA Migration Mode" (static
128-bit WEP key is used for broadcast
and multicast traffic) Requires
preshared key.
WPA Passphrase (Preshared
Key)
Configures the Pre-Shared Key used with WPA-PSK security.
The input range is 8 to 63 ASCII characters or 64 hex
characters. This key must match the key on the AP.
LEAP Username Configures the WPA-LEAP username.
The LEAP username [1 to 32 characters] must match the
LEAP username assigned on the LEAP server. The LEAP
username cannot contain spaces.