Filter
Top Products
Quick Start Guide
Airborne Direct Ethernet Adapter
ABDG-ET-DP501/IN5010
Revision v2.1
February 2011
Document Number: 940-0193-210
Kit Contents:
Upon receiving the kit please check that you received the following:
ABDG-ET-DP501 or ABDG-ET-DP5010 Unit
5VDC Power Supply (2.1mm barrel jack)
o included with ABDG-ET_DP501
o optional for ABDG-ET-DP5010, included only if ordered as an accessory
2dBi, 2.4Ghz 50 ohm, omni-directional antenna
Quick Start Guide
Airborne Direct software and documentation CD
If any of the above contents are missing or appear damaged please contact Quatech Sales support directly at (800) 553-1170 or
support@quatech.com.
What you will need:
To evaluate the unit you will need the following components and facilities:
ABDG-ET-DP501 or ABDG-ET-IN5010 unit with included antenna attached.
Laptop or desktop system with an Ethernet port.
Power outlet for ABDG-ET-DP501/IN5010 power supply. Optionally 5-36 VDC power for the terminal block attachment (IN5010).
802.11b/g network for testing the unit, either AdHoc or Infrastructure (Access Points) mode. The test network configuration must be
known. Required information will include:
o SSID (Wireless network name).
o Security settings (WEP, WPA, WPA2, etc.).
o Security credentials (passphrase, key or certificates).
o Static IP address, Subnet Mask and Gateway address if static IP addresses are used on the test network.
A web browser on the laptop top or desktop (Internet Explorer, Firefox, Opera and Chrome v4.0 are supported).