Quatech IN5420 Server User Manual


 
AirborneDirect™ Serial Device Server Quick Start Guide Quatech, Inc.
100-8106-210 3 February 2011
8
Right Click the Unmanaged Device then:
1. Select Change Management State
2. Select Manage OEM-Cfg1
3. Select Device OEM-Cfg1 is Factory Default
9
The devices status will move to managed and the device will be displayed under the device type/group it
belongs too. Right click the device and then:
1. Select Connectivity Tools
2. Select Launch Web Browser for OEM-Cfg1
10
Opening web page shows adapter status.
Links to the available configuration options are identified in the left hand menu. The top menu bar
provides access to different operations that can be performed by the AirborneDirect™ device. Please
refer to the User’s Manual for a full description of how to use the web interface.
11
Using Express Setup:
If this is the first time you have configured the device the Express Setup page will be displayed. This
page provides access to the critical configuration items needed to get the ABDG up and running quickly.
See Express Setup Configuration Page section for details on how to configure the device.
Please refer to the User’s Manual for complete details on ABDG device configuration.
12
When the Reboot button is pressed the unit will restart and install new settings. This may take 15-20
seconds. Please refresh the web interface after the boot cycle has completed.
13
When configured correctly the LED pattern should match the following:
ABDG-SE-IN5XXX No TCP Connection TCP Connection
COMM: Off Green
LINK : Green Green
POST: Green Green
POWER: Blue Blue
14
To use the adapter on the wireless network, address all traffic to the IP address of the wireless interface
of the ABDG-SE- IN5XXX. This address is listed in the home page of the web interface.