Filter
Top Products
9. Use the Logical COM Port names to access the serial ports on your QSC-100
through your software applications. Note: The Logical COM Port name is
assigned to your ports by Windows 95. This name is required by a Windows
application when accessing a particular port.
5.6 Windows NT
Device drivers for Windows NT and OS/2 are also available for the QSC-100.
The board can be used under DOS and other operating systems as well in many
circumstances. The software described below can be downloaded from the Quatech
web site if it did not come with the board.
The Windows NT device driver is installed by running the SETUP program. Up
to 256 serial ports are supported. There is a command line-based configuration utility
which is used for adding PCI bus and ISA bus serial ports. Please refer to the
documentation included with the device driver on the Quatech COM CD for full
installation and configuration details
Quatech QSC-100 User's Manual
19