Filter
Top Products
Quatech's "QTPCI" utility supplies the information required when modifying the
serial port settings of the application. This program should be run from real DOS, not in
a Windows DOS box.
Figure 13 shows the Basic Mode display for the QSCLP-100 after the "Q" key
has been pressed. In this example, the QSCLP-100 uses I/O base address FF80 hex
and IRQ 11. The hardware revision of the QSCLP-100 is also displayed. Pressing the
"N" key will show similar information for all non-Quatech PCI devices in the system,
including those devices integrated on the motherboard.
The QTPCI program is capable only of displaying the PCI configuration. It
cannot be used to make changes.
Figure 14 --- QTPCI.EXE Basic Mode display
Figure 14 shows the Expert Mode display for the QSCLP-100 after the "Q"
key has been pressed. The information from the Basic Mode display is presented along
QSCLP-100 User's Manual 19