Filter
Top Products
44
Beyond the Basics
• Hi On or Hi OFF
• UHF On or UHF OFF
• 800 On or 800 OFF
4. Repeatedly press
e or d until the option you want
appears, then press E to select it. Otherwise, press ./CLR
if you do not want to select it. Then skip to Step 9.
5. Press E while S-S.ALt appears. One of the following alert
options appears:
• ALT bEEP: The scanner beeps when a signal stalker
signal is detected.
• ALT OFF: The scanner does not provide any alert
when a signal stalker signal is detected.
6. Repeatedly press
e or d until the option you want
appears, then press E to select it. Otherwise, press ./CLR
if you do not want to select it. Then skip to Step 9.
7. Press E while S-S.PS appears. One of the following
options appears:
• PS On: The scanner ignores common pager
frequencies.
• PS OFF: The scanner does not screen common pager
frequencies.
8. Repeatedly press
e or d until the option you want
appears, then press E to select it. Otherwise, press ./CLR
if you do not want to select it.
9. When you select the option, press ./CLR to exit the option
mode.