Radio Shack 26-592 Mouse User Manual


  Open as PDF
of 2
 
© 2003 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
OWNER’S MANUAL —
Please read before using this equipment.
www.radioshack.com
SM
26-592
Your RadioShack Illuminations USB Mini
Optical Mouse with Glowing Wheel is
designed specifically for notebook PCs or
PCs with either a universal serial bus (USB)
or PS/2 port. You can scroll, zoom, or click
using the scroll wheel and programmable
buttons. Its compact size makes it ideal to
carry with your notebook computer. Its
optical sensor receives 1500 signals per
second allowing it to detect movement
precisely without moving parts to clean or
replace.
SYSTEM REQUIREMENTS
Hardware — IBM PC or compatible with
one available USB or PS/2 port.
Software for operation with USB —
Microsoft Windows 98, Windows 2000,
Windows ME, or Windows XP.
Software for operation with PS2 —
Microsoft Windows 95, Windows 98,
Windows 2000, NT4.0, Windows ME, or
Windows XP.
Supplied Driver CD — lets you quickly
configure your mouse with almost any IBM-
compatible computer.
INSTALLATION
Hardware
Computer with USB Mouse Port
1. With the computer on, connect the
mouse cable’s rectangular USB plug to
the computer’s USB port.Ô
2. Follow the on screen instructions to
install the Windows mouse driver.
Computer with PS/2 Mouse Port
1. Turn off the computer.
2. Connect the supplied PS/2 adapter plug
to the mouse cables’ USB plug.
3. Plug the mouse cable’s round PS/2 plug
to the computer’s PS/2 mouse port.
4. Turn on the computer.
5. Follow the on screen instructions to
install the Windows mouse driver.
Software (Windows 95 Only)
To use all of the mouse features, you must
install the supplied driver software onto your
computer.
1. Insert the supplied driver software CD
into your computer’s CD-ROM drive.
2. The mouse program will run
automatically. If not, click
START on the
task bar, and then click
RUN.
3. <D>:/Disk1/Setup.exe appears in the
Run dialog box. (If the software setup
CD is in drive D).
4. Click
OK or ENTER.TheSetupscreen
appears. Follow the on-screen
instruction to proceed.
5. Remove the driver software CD from
the CD-ROM drive after finishing mouse
driver installation.
6. Topastethemouseicononthe
Windows’ desktop as a shortcut for
configuring the mouse properties later,
right click the mouse icon under
Windows’ Control Panel to open Create
Shortcut dialog box. Then follow the
onscreen instruction.
USBConnector—connects
easily to USB ports
USB to PS/2 Adapter — connects
mouse to PCs without a USB por
t
Scroll Wheel with Blue LED — allows
you to scroll or zoom. The blue LED
lights when the mouse is operating.
Right Button — accesses
pop-up menus
Left Button — performs
the CLICK, SELECT, and
DOUBLE CLICK
commands.
True 400 DPI (dots per inch) Resolution — allows the mouse to move fluidly across
higher resolution monitors
Ô NOTES Ô
• Refer to your computer’s owner’s manual for
the location of the USB or PS/2 port.
• The mouse will NOT work with a serial port
adapter.
• Windows 98, 2000, ME, or XP is required to
use this mouse in a USB port.
USB Mini Optical Mouse
with Glowing Wheel
!
IMPORTANT
!
If an icon appears at the end of a paragraph, go to the box on that page
with the corresponding icon for pertinent information.
!
— Important Ô —Note —Caution
PACKAGE CONTENTS
• Optical Mouse
• PS2 Adapter
• Mouse Driver CD (Windows 95 only)
• Velcro Tape for Cable Management
• This Owner’s Manual
THE FCC WANTS YOU TO KNOW
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference toradio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult your local RadioShack store or an
experienced radio/TV technician for help.
• If you cannot eliminate the interference, the FCC
requires that you stop using your mouse. Changes
or modifications not expressly approved by
RadioShack may cause interference and void the
user’s authority to operate the equipment.
FCC DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Product: USB Mini Optical Mouse
with Glowing Wheel
Model: Cat. No. 26-592
Responsible Party: RadioShack
100 Throckmorton
Fort Worth, TX 76102
Phone: 817-415-3200
This product has been tested to comply with
International Standard IEC 825-1:1993
26-592_95.fm Page 1 Wednesday, March 5, 2003 10:11 AM