Filter
Top Products
6 7 8 9 10
FCC Information
1. This equipmentcomplies withPart68 ofthe FCCrules andthe requirementsadopted
by theACTA. On the bottom of this equipment is a label that contains, among other
information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this
number must be provided to the telephone company.
2. Theregistration jack USOCforthe equipmentis RJ11.
3. TheREN isuseful todetermine thequantity ofdevices thatmaybe connectedto the
telephone line. Excessive RENs on the telephone line may result in the devices not ringing
in response to an incoming call. In most, but not all areas, the sum of RENs of all devices
should not exceed five (5).Tobe certain of the number of devices that may be connected
to a line, as determined by the total RENs, contact the local telephone company.
4. Thisequipment isdesigned tobe connectedto thetelephone networkor premiseswiring
using a compatible modular jack which is Part 68 compliant. See installation instructions
for details.
5. If thissurge protectorcauses harmtothe telephonenetwork, thetelephonecompany will
notify you in advance that temporary discontinuance of service may be required. But if
advance notice isn’t practical, the telephone company will notify the customer as soon as
possible.You will be advised of your right to file a complaint with the FCC if you believe it
is necessary.
6. Yourtelephone companymaymake changes inits facilities, equipment,operations, or
procedures that could affect the operation of your equipment. If they do, you will be given
advance notice so as to give you an opportunity to maintain uninterrupted service.
7. If you experience troublewith thissurge protector,please contact IgnitionL.P.at 1-866-
315-0426. If your equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the problem is resolved.
8. No repaircan bedone tothisequipment.
9. Connection toparty lineservice issubject tostate tariffs. Contactthe state publicutility
commission, public service commission or corporation commission for information.
10. Ifyour homehas speciallywired alarmequipment connectedto thetelephone line,ensure
the installation of this surge protector does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult your telephone company or a
qualified installer.
LimitedWarranty and Connected
Equipment Guarantee
Ignition L.P. warrants this surge protector product (“Product”) against defects in materials
and workmanship under normal use by the original purchaser for five (5) years after the
date of purchase (the “Warranty Period”). IGNITION L.P. MAKES NO OTHER EXPRESS
WARRANTIES.
This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse,
failure to follow instructions, improper installation or maintenance, alteration, accident, Acts of
God (such as floods) except as expressly stated herein; (b) improper or incorrectly performed
repairs by persons who are not an Ignition L.P.Authorized Service Facility; (c) consumables
(such as fuses); (d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping
or insurance costs; (f) costs of product removal, installation, set-up service, adjustment or
reinstallation; and (g) claims by persons other than the original purchaser.
Connected Equipment Benefit: If the Product is properly installed and connected (as defined
below) to any electronic equipment (the“ConnectedEquipment”) and if the Connected
Equipment is damaged during theWarranty Period by a transient voltage surge/spike from the
AC power line, telephone line or coaxial line that enters the Connected Equipment through
the Product, then Ignition L.P.will reimburse the original purchaser of the Product the lesser
of: (a) the repair charges for the Connected Equipment; (b) the purchase price of replacement
equipment that is reasonably comparable (as determined by Ignition L.P.in its sole discretion)
to the Connected Equipment; or (c) the original purchase price of the Connected Equipment;
provided, however, that in no event will the Connected Equipment Benefit exceed a maximum
of one hundred thousand U.S. dollars ($100,000) (the “Equipment Limit”). The Connected
Equipment Benefit does not cover data loss and is subject to all of the limitations described in
the all capitalized paragraph below. In order to qualify for the Connected Equipment Benefit,
the Product must be returned to Ignition L.P. and inspection of the Product must show its
stated protection capacity was exhausted by a power surge.
“Properly installed and connected” means: (a) the Product must be plugged directly into a
properly wired and grounded AC outlet; (b) that no extension cords, adapters, other ground wires
or electrical connections may be used to connect the Product toAC power; (c) that no more than
one piece of Connected Equipment may be connected to any one outlet of the Product; (d) that
the wiring in the building must comply with all applicable codes (NEC, CSA, etc.); and (e) that all
wires (power, telephone and coaxial) leading into the Connected Equipment must pass through
the Product. To claim damage to Connected Equipment as a result of telephone line transients,
the Product must provide telephone line protection, and your telephone service equipment must
include a properly installed and operating “primary protection” device at the service entrance.
Primary protection devices are normally available from the telephone company and added during
telephone line installation. To claim damage to Connected Equipment as a result of coaxial line
transients, the Product must provide coaxial line protection.
To make a claim for surge-induced damage to Connected Equipment, you must:
1) Call IgnitionL.P.at 1-866-829-2185for areturnauthorization numberduring theWarranty
Period. Under no circumstances will a claim for surge-induced damage to Connected
Equipment be accepted without a return authorization number;
2) Haveanysurge-induced, damagedConnected Equipmentrepaired (orget anestimate for
repair) by a service center authorized by the manufacturer of the Connected Equipment
unless the service center determines that the Connected Equipment is not repairable or
that the cost of repair will be more than the purchase price of comparable replacement
equipment. If the Connected Equipment is not to be repaired, get a written quotation for
the purchase price of comparable replacement equipment. In no event will Ignition L.P.
reimburse more than the Equipment Limit.The repair bill or estimate from the authorized
service center must indicate that the damage to the Connected Equipment was surge-
induced; and
3) Ship theoriginal surgeprotector, postage prepaidto: IgnitionL.P.,4241 12th AVENUE EAST
SUITE 400, SHAKOPEE, MN 55379. Include: (a) your name, address and daytime telephone
number; (b) the original or a photocopy of the sales receipt for the surge protector; (c) a
brief description of any problem with the surge protector; (d) a brief description of how
the damage to the Connected Equipment occurred; (e) the original authorized service
center repair bill or estimate documenting that the damage to the Connected Equipment
was surge-induced; and (f) if replacement equipment is to be purchased, the original or
a photocopy of the quotation for comparable replacement equipment and the authorized
service center repair estimate must contain a statement that the Connected Equipment is
not repairable or that the cost of repair will be more than the purchase price of comparable
replacement equipment.
If Ignition L.P. determines that damage to Connected Equipment is covered, Ignition L.P. will
reimburse, up to the Equipment Limit amount defined above, to the original purchaser of the
surge protector Product the lower of the: (a) repair charges; (b) purchase price of comparable
replacement equipment; or (c) the original purchase price of the Connected Equipment.
How to Make aWarranty Claim: In the event of a covered Product defect during theWarranty
Period, Ignition L.P. will, at its option, unless otherwise provided by law: (a) correct the defect
by surge protector repair without charge for parts and labor; (b) replace the surge protector
with the same or a comparable product; or (c) refund the purchase price of the surge protector.
To make a warranty claim for a defect in the surge protector Product without a claimfor
surge-induced damage to Connected Equipment, you must, during theWarranty Period, take
the Product and the sales receipt as proof of purchase date to the place of purchase.
All replaced parts, products, and Connected Equipment and products and Connected
Equipment on which a refund is made, become the property of Ignition L.P. New or
reconditioned parts and products may be used in the performance of warranty service.
Repaired or replaced parts in surge protectors and replacement surge protectors arewarranted
for the remainder of theWarranty Period.You will be charged for repair or replacement of the
Product made after the expiration of theWarranty Period.
IGNITION L.P.EXPRESSLY DISCLAIMSALLWARRANTIES AND CONDITIONS NOT STATED
INTHIS LIMITEDWARRANTY. ANY IMPLIEDWARRANTIESTHAT MAY BE IMPOSED BY
LAW, INCLUDINGTHE IMPLIEDWARRANTY OF MERCHANTABILITY AND, IF APPLICABLE,
THE IMPLIEDWARRANTY OF FITNESS FORA PARTICULAR PURPOSE, SHALL EXPIRE ON
THE EXPIRATION OFTHE STATEDWARRANTY PERIOD.
EXCEPTAS DESCRIBEDABOVE, IGNITION L.P. SHALL HAVE NO LIABILITY OR
RESPONSIBILITYTOTHE PURCHASER OFTHE PRODUCT ORANY OTHER PERSON
OR ENTITYWITH RESPECTTOANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY
OR INDIRECTLY BY USE OR PERFORMANCE OFTHE PRODUCT OR ARISING OUT OF
ANY BREACH OFTHISWARRANTY, INCLUDING, BUT NOT LIMITEDTO, ANY DAMAGES
RESULTING FROM INCONVENIENCE ANDANY LOSS OFTIME, DATA, PROPERTY, REVENUE,
OR PROFITANDANY INDIRECT,SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
EVEN IF IGNITION L.P.HAS BEENADVISED OFTHE POSSIBILITY OF SUCH DAMAGES.
Some States do not allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damages, so the above limitations or exclusions may
not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from State to State.You may contact Ignition L.P. at:
Ignition L.P.,3102 MapleAveSuite 450,Dallas,TX 75201 06/09
For product support, call
1-866-315-0426
Printed
in China
06A09
61-188
© 2009. Ignition L.P.All rights reserved.
Enercell is a trademark used by Ignition L.P.
ClampingTime.............................................................. <1 nanosecond
ClampingVoltage..........................................................................400 V
Additional Protection...........Coax (1 in, 1 out); Fax/Modem (1 in, 1 out)
OperatingTemperature......................................32 to 104°F (0 to 40°C)
UL Approvals ............................................................UL1449 & UL1363
Specifications are subject to change and improvement without notice.
Actual product may vary from the images found in this document.
Important Safety Information
• This product is intended for indoor use only.
• This surge protector is not a lightning arrestor and might not protect
against lightning-induced voltage surges.
•
The total wattage of all connected devices must not exceed 1,875 watts.
• Use the surge protector only with a three-prong standard AC plug.
The surge protector cannot provide protection without a grounded
AC source.
• TelephoneWire Instructions
» Never install phone wiring during a lightning storm.
» Never install a telephone jack in wet locations unless the jack is
specifically designed for use in wet locations.
» Never touch un-insulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
• Retain Instructions — Retain the safety and operating instructions
for future reference.
• Damage —Turn off the breaker, then unplug the surge protector
from the wall outlet and replace it:
» If the plug is damaged.
»
If liquid has been spilled or objects have fallen into the surge
protector, or the surge protector has been exposed to rain or water.
» If the surge protector has been dropped or damaged in any way.
» If the PROTECTEDWHEN LIT indicator fails to light.
Y
Caution: DO NOT install this device if there is not at least 10
meters (30 feet) or more of wire between the electrical outlet and
electrical service panel.
Protect the environment by recycling used electronics. Go to
E-CyclingCentral.com to find an electronic recycling center near you.
Troubleshooting
Q: The GROUNDED WHEN LIT indicator does not light.
A: Move your surge protector to a different grounded,
three-prong wall outlet. If it still does not light, return
the product to the dealer for assistance. If the surge
protector proves to be working properly, you may
need to contact a professional electrician to check
your outlets for proper grounding.
Q: The PROTECTED WHEN LIT indicator does not light.
A: Try moving the surge protector to another wall outlet.
If that does not work, replace the surge protector. It
may have received a surge or spike that it absorbed,
but may be damaged and will not protect against
future surges and spikes.
Specifications
LineVoltage ..................................................................................120 V
Line Current....................................................................................15 A
Frequency................................................................................50/60 Hz
Cord Length/PlugType.................................6 ft (1.8m), right angle plug
Circuit Breaker................................................................................15 A
Noise Frequency Range..........................................150 kHz – 100 MHz
Noise Attenuation Level.......................................................Up to 30dB
Maximum SurgeVoltage ...........................................................6,000 V
Total Maximum Surge Current................................................105,000A
Composite Maximum Energy Dissipation
120V AC Line........................................................................ 2100 J
Phone Line............................................................................. 150 J
Total Maximum Energy Dissipation...................................... 2250 J
Modes of Protection........3 (Hot-Neutral, Hot-Ground, Neutral-Ground)