Radio Shack 61-2433 Surge Protector User Manual


  Open as PDF
of 4
 
3
%100'%6+0) "%#$.'"68
1. Securely connect the cable TV
system’s coaxial cable to the surge
protector’s
CABLE TV IN
F-connector.
2. Connect the surge protector’s
CABLE TV OUT
to your TV’s CABLE TV
IN using a coaxial cable with F-
connectors at both ends (not supplied).
%100'%6+0) "5#6'..+6'"68
1. Securely connect the satellite TV
system’s coaxial cable to the surge
protector’s
DSS IN
F-connector.
2. Connect the surge protector’s
DSS OUT
to your satellite TV or VCR’s CABLE TV
IN using a coaxial cable with F-
connectors at both ends (not supplied).
%100'%6+0) "6*'"&'8+%'N5"
#%"2
19'4"%14&*5+
Connect your device’s grounded AC power
cords (up to seven) to the surge protector’s
AC sockets. Connect AC adapters (up to
four) to the surge protector’s four upper
sockets.
%100'%6+0) "#%"219'4
After you complete all the above
connections to the surge protector, plug the
surge protector’s AC power cord into a
three-prong standard grounded AC outlet.
75+0)"6*'"5#('6;"5.+&'"
%
18'4
Your surge protector is equipped with a
safety slide cover on each of its eleven AC
sockets. Slide the cover up to protect each
unused AC socket.
75+0)"6*'"+0&+%#6+10"6#)5
Your surge protector comes with pairs of
indication tags to help you identify which
device’s power cord is connected to which
AC socket. Stick a large tag on the power
cord at the rear of the device and the same
color small tag next to the surge protector’s
target AC socket.
12'4#6+10
Press
POWER
to turn on the surge
protector.
±
Your connected devices are protected when
the PROTECTED WHEN LIT, ON and
GROUNDED WHEN LIT indicators light.
If any of the indicator lights fail, see
“Troubleshooting”.
6417$.'5*116+0)
Condition
The GROUNDED WHEN LIT indicator does
not light.
Solution
Your surge protector is not grounded. You
must move it to a different grounded, three-
prong AC outlet.
#
If the GROUNDED WHEN LIT still does not
light after moving the surge protector to a
grounded oultet, return the product to
RadioShack for assistance.
If the surge protector proves to be working
properly, you may need to contact a
professional electrician to check your outlets
for proper grounding.
Condition
The PROTECTED WHEN LIT, ON and
GROUNDED WHEN LIT indicators turn off,
and
RESET
pops out.
Solution
Your surge protector received a current that
exceeded its capacity due to overload.
When this happens, the 15-amp circuit
breaker (located on the side of the case)
trips to prevent possible damage, and
RESET
pops out. To reset the surge
protector, disconnect one or more of the
connected devices and allow the surge
protector to cool down. Then push
RESET
in.
Condition
The PROTECTED WHEN LIT, ON and
GROUNDED WHEN LIT indicators turn off,
and the surge protector sounds an alarm.
Solution
Your surge protector's AC line is no longer
protected from surges and power is not
allowed to pass beyond the alarm. When the
surge protector receives an unusually strong
surge, the built-in protection absorbs the
surge to protect your equipment. If the surge
is strong enough, it diminishes the
protection circuitry’s ability and the surge
protector sounds an alarm. If the
PROTECTED WHEN LIT, ON and
GROUNDED WHEN LIT indicators will not
light, replace the surge protector.
.
..
.
%#4'
Keep the surge protector dry; if it gets wet,
wipe it dry immediately. Use and store the
surge protector only in normal temperature
environments. Handle the surge protector
carefully; do not drop it. Keep the surge
protector away from dust and dirt, and wipe
it with a damp cloth occasionally to keep it
looking new.
5'48+%'"#0&"4'2#+4
If your surge protector is not performing as it
should, take it to your local RadioShack
store for assistance. Modifying or tampering
with the surge protector’s internal
components can cause a malfunction and
might invalidate its warranty.
±
"016'"
±
"
When you are not using the surge protector,
press POWER so it pops up to turn off the
surge protector. The PROTECTED WHEN LIT,
ON, and GROUNDED WHEN LIT indicators
turn off.
#
"+/2146#06"
#
Operating this surge protector from a non-
grounded outlet will invalidate your “Connected
Equipment Guarantee” and puts your valuable
equipment at risk.
.
"%#76+10"
.
Retain Instructions— Retain the safety and
operating instructions for future reference.
Damage — Unplug this appliance from the wall
outlet and replace it:
• When the power cord or plug is damaged.
• If liquid has been spilled or objects have
fallen into the appliance.
• If the appliance has been exposed to rain or
water.
• If the appliance has been dropped or
damaged in any way.
• When the PROTECTED WHEN LIT indicator
fails to light.
 previous