Radio Shack ACR-326 Clock User Manual


 
11
Using the Alarms
1. Repeatedly press
MODE
until the
desired alarm’s display
(
AL1
or
AL2
)
appears, then press
ALARM
ON/OFF
to set the selected alarm to
sound. or appears to confirm
that one or both alarms are set to
sound.
2. Repeatedly press
MODE
until the
normal time display appears or wait
15 seconds. The clock stores the
setting and resumes normal opera-
tion.
3. To wake to the alarm sound, slide
ALARM/AUTO/OFF/ON
to
ALARM.
At
the preset time, the alarm sounds
for up to 60 minutes then it turns off.
To stop it sooner, press
ALARM ON/
OFF
or slide
ALARM/AUTO/OFF/ON
to
OFF
.
4. To wake to the radio, slide
ALARM
/
AUTO/OFF/ON
to
AUTO
. At the pre-
set alarm time, the radio automati-
cally turns on for up to 60 minutes.
To turn off the radio sooner, press
ALARM ON/OFF
or slide
ALARM/
AUTO/OFF/ON
to
OFF
.
Using Snooze
To temporarily silence the alarm (or the
radio), press
SNOOZE
. This silences the
alarm (or the radio) for about 9 minutes.
You can press
SNOOZE
as many times
as you like.
USING THE SLEEP TIMER
You can set the radio to play for up to 1
hour and 59 minutes then automatically
turn off. You can use this feature to have
the radio play as you go to sleep.
Follow these steps to set the sleep tim-
er.
1. Set
ALARM/AUTO/OFF/ON
to the
desired setting (
ALARM
,
AUTO
, or
OFF)
.
2. Press
SLEEP
.
and
1:00
appear, and the radio turns on.
3. To change the sleep timer’s duration
to less than 1 hour, repeatedly press
DOWN.
To set the sleep timer for up
to
1 hour and 59 minutes
,
repeat-
edly
press
UP.
Notes
:
If you do not press
UP
or
DOWN
within 3 seconds, the sleep timer
is set to 1 hour. Press
SLEEP
again to change the setting.
If the clock reaches a preset
alarm time while the sleep timer is
counting down, the alarm can-
cels the balance of the sleep
timer setting.
4. To turn off the radio before the set
sleep time has elapsed, press
SNOOZE.
To cancel the sleep timer
at any time, slide
ALARM/AUTO/OFF/
ON
to
ON
.
12-1626.fm Page 11 Friday, January 14, 2000 9:32 AM