Filter
Top Products
12
Operation
USING THE RECEIVER’S BELT CLIP
The belt clip on the receiver lets you
keep your hands free while monitoring.
To detach the belt clip, unlatch the clip
by lifting the tab slightly with your finger
or a screwdriver, then slide the belt clip
in the direction of the arrow.
ˆ
Operation
1. Slide
POWER
on the transmit-
ter to the right to turn it on.
The POWER indicator lights.
2. Rotate
POWER ON/VOLUME
on the receiver to turn it on.
The POWER indicator lights.
Note:
If the receiver makes a
shrill noise, it is too close to
the transmitter.
3. Rotate
POWER ON/VOLUME
on the receiver to adjust the
volume. The louder the sound, the more indicators light,
regardless of the
POWER ON/VOLUME
setting.
4. Ask someone to talk near the transmitter (or place a radio
near the transmitter). Move around the house with the
receiver to check the transmitter’s range.
Tab
POWER
CHANNEL
1 – 2
43-489rc.fm Page 12 Tuesday, October 3, 2000 10:12 AM