Filter
Top Products
20
21
3. Rotate the knob to select 2: Store Race, then
press E
PGM
.
4. Rotate the knob to select one of the races,
then press E
PGM
.
CAUTION: Be sure the race you select is the
same one that is currently loaded into the
scanner’s memory. Otherwise you could overwrite
the wrong race.
5. If you select races A, B, or C, Store Bank 0 into
Bank X Yes=”1” / No=”3” appears.
If you select races D, E, or F, Store Bank 0 and 1
into Bank X Yes=”1”/No=”3” appears.
6. Press 1 to overwrite the race or press 3 to
cancel.
If you accidentally overwrite the wrong race, it
can be restored by following the steps in “Wired
Programming.”
Storing Known Frequencies Into Channels
To locate and store specific frequencies into
channels for later use.
1. Press SCAN/MAN to enter manual mode.
2. Press E
PGM
to put the scanner in
programming mode. PGM appears.
3. Use the number keys to enter the channel
number you want to assign to a frequency.
4. Press SCAN.
5. Use the number keys and •CLR to enter the
frequency, including the decimal point you
want to store.
6. Press E
PGM
to store the frequency.
7. Press EPGM again. The Edit Channel menu
appears.
8. Rotate the knob to select 1: Edit Car#, then
press E
PGM
.
9. Use the number keys to enter the car number
in 3-digits, then press E
PGM
.
10. Rotate the knob to select 2: Edit Tag, then press
E
PGM
.
11. Use the number keys to enter the tag then
press E
PGM.
12. To program the next channel in sequence,
press Menu then repeat the steps from 3.
Notes:
• If you entered an invalid frequency in Step
5, Invalid Freq appears and the scanner beeps
error tones. Enter a valid frequency.
• If you entered a frequency in Step 5, which
already exists on another channel, the
scanner beeps an error tone and displays
that channel. Press •CLR to clear the display,
or press E
PGM
to store the frequency in both
channels.
• The scanner automatically rounds the
entered number to the nearest valid
frequency. For example, if you enter 151.473
(MHz), your scanner accepts it as 151.475.
• Rotate the knob if you want to add a frequency
to a clear channel or different bank number.
Editing a Tag
To input a tag:
• Press the number/letter buttons multiple
times until the desired letter appears.
• Rotate the knob clockwise to move the
cursor to the left, counterclockwise to move
to the right.