Filter
Top Products
108
Detailed Menu Reference
109
Detailed Menu Reference
TSYS
Parameter
Options Description
Threshold Lo 1-99 Available When Multi-Site is set to ROAM. Sets the
control channel decode % threshold for a site to
be considered out of range, which will begin the
process of looking for a new site.
T Tables Default,
Splinter,
Custom
For Motorola and P25 systems only - sets custom
channel tables. Use , to select option, press SEL
on Custom to enter custom table information.
Fleet Map Type I For Motorola Type I systems only—sets fleet map.
LMIT Menu
The LMIT menu is used when creating new Limit Search objects, or
editing existing Limit Search objects.
LMIT
Parameter
Options Description
Scan Lists On or Off for Scan
Lists 1-22
Sets membership in Scan Lists. Use
keys to scroll through Scan Lists. Use SEL
key to toggle Scan List membership. A “*”
next to the Scan List number indicates that
the object is mapped to that Scan List.
FrLo Any supported
frequency in MHz
A frequency that will be used as the lower
limit for the limit search range.
FrHi Any supported
frequency in MHz
A frequency that will be used as the upper
limit for the limit search range.
Tag Alpha-
numeric text
The alphanumeric display name for the
LMIT search. Use the standard text entry
method or QTXT to name the object.
L/Out On or Off Permanent lockout for the LMIT channel.
Also accessed by pressing FUNC L/OUT
while the scanner is stopped on the LMIT
object.
LED Mode Solid or Flash Controls whether the Alert LED flashes
or remains on solid when the Alert LED is
used.
LMIT
Parameter
Options Description
LED Color 0-7 Sets LED color to 0-7 as defined in the
GLOB menu. By default, 0=LED Off,
1=Red, 2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
Latch LED On or Off Normally the Alert LED is active only while
the object is receiving a transmission.
When Latch is on, the Alert LED will remain
lit after the transmission is complete, un-
less overridden by a subsequent object
that is also using the Alert LED.
Backlight On, Off or Flash Controls whether the backlight should be
on, off or flashing while the object is active.
Alarm None, Chirp,
Hi-Lo, Alert, Ring,
2-Chirp, Fast Hi-
Lo, DTMF#
Sets the Audible Alarm for the LMIT ob-
ject. When an Audible Alarm is selected,
the selected alarm will play anytime the
scanner stops for activity on the LMIT
object while scanning.
Fav Yes or No When On, the LMIT object is a member of
the Favorites Scan List.
EXPERT BELOW
Modulation Auto, AM,
FM,
NFM
Modulation setting for the LMIT search. In
most cases Auto will work fine. Use AM to
override and force AM modulation, FM to
force FM modulation, NFM to force narrow
FM modulation.
Atten On or Off When on, applies 20 dB of attenuation to
all hits received on the LMIT search. Useful
in areas where interference from nearby
strong signals is present.
Delay On or Off Controls whether a Delay is used to wait
for reply traffic after a transmission is
received during the LMIT search.
Delay Time 1-250 x 100 ms Sets the amount of time (in 100 millisecond
intervals) for the wait for reply delay if
Delay is On, e.g., 20=2 seconds.