Filter
Top Products
106
Detailed Menu Reference
107
Detailed Menu Reference
TSYS Menu
The TSYS menu is used when creating new Trunking System objects,
or editing existing Trunking System objects.
TSYS
Parameter
Options Description
Type MOT
800/900,
MOT
VHF/UHF,
P25
MANUAL,
P25
AUTO,
EDACS
STD,
EDACS
NAROW,
LTR
Sets the trunking system type. Choose MOT
800/900 if the system is a Motorola 800 or 900
MHz analog or digital trunked radio system that
uses the 3600 baud control channel. Use P25
AUTO for most Project 25 systems that send
channel table information over the system control
channel. Use P25 MANUAL if it is necessary to
manually set the channel table information or if you
wish to use the default 800 MHz table data. Use
EDACS STD for most 800 MHz EDACS systems
using the 9600 BPS EDACS control channel. Use
EDACS NAROW for most 900 MHz and some
VHF/UHF EDACS systems using the 4800 BPS
EDACS control channel. Use LTR for Logic Trunked
Radio (LTR) systems.
Tag Alpha-
numeric
text
The alphanumeric display name for the TSYS. Use
the standard text entry method or QTXT to name
the object.
Frequencies SEL Press SEL to enter trunked radio system frequen-
cies. Enter control channel frequencies in any order
for all Motorola and Project 25 trunking systems.
Enter system frequencies in LCN order for all
EDACS trunking systems. Enter system frequencies
in Home Repeater order for LTR systems.
L/Out On or Off Permanent lockout for the TSYS. When On, no
traffic will be received on any programmed TGRPs
for this TSYS.
EXPERT BELOW
Atten On or Off When on, applies 20 dB of attenuation to all
transmissions on this TSYS. Useful in areas where
interference from nearby strong signals is present.
TSYS
Parameter
Options Description
Narrow FM Yes or No Use Yes when the system is known to use Narrow
FM modulation. Most 900 MHz analog trunked
radio systems utilize NFM modulation. This set-
ting has no effect on digital trunked radio system
performance.
AudioBoost On or Off Activates 6 dB audio level boost for all activity on
this TSYS.
Dwell 0-200 x
100 mS
Sets the amount of time the scanner dwells on a
Motorola, P25 or EDACS system control channel
for activity on programmed talkgroups. Use 0 for
automatic mode, which uses control channel in-
formation to determine when all current talkgroup
information has been broadcast by the system.
Digital AGC On or Off Controls Digital AGC function for the TSYS.
Supertrack On or Off Alternative DSP decoding algorithm. May help
reception on some systems.
Multi-Site Off,
Roam or
Stat
(Stationary)
Used with networked Motorola and P25 trunked ra-
dio systems. When Multi-Site=Off, the scanner will
find the first usable control channel in the control
channel list and use it to track the system. When
Multi-Site=Roam, the scanner will always attempt
to lock on to control channels where the decoding
quality is greater than Threshold Hi, and will search
for new control channels when the decoding qual-
ity of a control channel drops below Threshold
Lo. If no control channels are available that meet
the Threshold Hi criteria, the scanner will seek the
best control channel to use, and continue checking
periodically for a new control channel that meets
the Threshold Hi criteria. When Multi-Site=STAT,
the scanner will track the system using every usable
control channel in the control channel list.
Threshold Hi 1-99 Available When Multi-Site is set to ROAM. Sets the
control channel decode % threshold for a site to be
considered good when looking for a new site.