Filter
Top Products
96
Detailed Menu Reference
97
Detailed Menu Reference
Appendix B: Detailed Menu Reference
• Context sensitive help is available for every menu parameter. Press
FUNC SEL to view help for the selected parameter. Press SEL to exit
help.
• Each menu parameter includes a Dflt softkey, which restores
the factory default setting for that parameter.
GLOB Menu
The GLOB menu stores all of the radio-wide settings used by the
scanner. The active parameter is always the middle parameter and is
indicated by a flashing colon (:).
Notes:
• Some GLOB parameter changes do not take effect until the
GLOB menu is saved.
• You can restore all GLOB settings to their defaults
without affecting
your programmed objects or V-Scanners. Power cycle the radio,
then press 0, then 2 during the welcome message display.
Press
ENT to confirm the GLOB parameter reset.
• The Special Global menu (FUNC GLOB)
includes parameter
settings that may adversely affect the performance of your radio if
not set properly. We recommend that users not change the settings
found in the FUNC GLOB menu without specific instructions.
Should you experience difficulties after changing any of these
settings, you can restore them to factory defaults by pressing the
Dflt softkey associated with each menu line, or follow the global
reset procedure described above. See the product support page for
this scanner on www.RadioShack.com for detailed information on
the FUNC GLOB menu.
GLOB
Parameter
Options Description
Contrast 1-7
Sets LCD contrast. Use keys on 5-way
pushbutton pad.
Owner SEL Enters sub menu to set Welcome Message
text display.
Clone Send SEL Press SEL to send data using clone mode.
Alert Mode Both, Tone,
Light, Off
Controls the Alert LED and Audible Alarm
behavior. Both allows the LED and Tone.
Tone allows the audible alarm only. Light
allows the LED only. Off deactivates the
Alert LED and Audible Alarm feature.
Sound Mode On or Stlth Controls all radio beeps.
Key Beeps On or Off Controls key beeps.
Light Mode Norml, Stlth Controls the backlight operation. Norml
(Normal) causes the backlight to remain
on all the time. Stlth (Stealth) disables the
backlight.
Light Level Brit, Dim, Off
Controls backlight intensity. When Dim LED
is set to Yes, it also controls the Alert LED
intensity. Accessed from front panel using
DIM key.
Dim LED Global or Normal When on, DIM key and Light Level GLOB
menu parameter also control intensity of
Alert LED.
Atten Mode Global or Normal The attenuator reduces the amount of
signal at the receiver input. This helps
reduce interference from strong nearby
transmitters. Global attenuator mode
applies attenuation radio-wide, regardless
of individual object settings. In Normal at-
tenuator mode, the attenuator follows the
individual object attenuator setting.
Global Atten On or Off When the Atten mode is set to Global, this
controls whether the Global attenuator is
on or off.