Filter
Top Products
Searching the One Touch Banks
19
%NGCTKPI"C"5VQTGF"%JCPPGN
If you no longer want a frequency stored in a channel (and
you do not want to replace that frequency with a different
one), follow these steps to clear the stored frequency.
1. Hold down
SCAN/MAN
until
C7D
C7DC7D
C7D
appears to stop
scanning.
2. Use the number keys to enter the channel number
(1-200) you want to clear.
3. Press
PGM
.
F=C
F=CF=C
F=C
appears.
4. Press
0
then
ENT
. The frequency number changes to
&&&$&&&&
&&&$&&&&&&&$&&&&
&&&$&&&&
to indicate the channel is cleared.
.KUVGPKPI"VQ"VJG"/CTKPG"$CPM
To listen to the marine bank, press
MAR
.
CHh
CHhCHh
CHh
appears for
about 2 seconds, then the scanner starts searching from
marine channel 16.
To stop searching the channels, hold down
H
or
G
for about
2 seconds.
IH9>
IH9>IH9>
IH9>
disappears and
C7D
C7DC7D
C7D
appears.
To change the channel manually, press
H
or
G
.
To search through the marine bank again, hold down
H
or
G
for about 2 seconds.
C7Dý
C7DýC7Dý
C7Dý
disappears and
IH9>
IH9>IH9>
IH9>
appears.
To change the searching direction, press
H
or
G
.
You can select a marine channel directly. When the scanner
stops searching the marine bank, use the number keys to
enter the two-digit channel number.
.KUVGPKPI"VQ"VJG"9GCVJGT"$CPF
To hear your local forecast and regional weather
information, press
WX
. Your scanner begins to scan through
the weather band.
Your scanner should stop within a few seconds on your
local weather broadcast. If the broadcast is weak, you can
press
WX
again to resume scanning.
%JCPPGN "(TGSWGPE["*/*\+
1 162.400
2 162.425
3 162.450
4 162.475
5 162.500
20-424.fm Page 19 Monday, September 9, 2002 9:44 AM