Radio Shack PRO-29 Scanner User Manual


 
26
To clear all the skip frequencies at once, while in the search mode,
press and hold
LOCKOUT/S/S
until the scanner beeps twice.
Notes:
If you program more than 30 skip frequencies, each new fre-
quency replaces ones you stored earlier, starting from the first
stored frequency.
You can select the skipped frequency when the scanner is in the
hold mode. The scanner displays
L/O
when you select a skipped
frequency.
PRIORITY
You can scan through channels and still not miss an important or inter-
esting call on a specific channel. When a channel is selected as the pri-
ority channel and the priority feature is turned on, the scanner checks
that channel every 2 seconds, and stays on the channel if there is activ-
ity.
PRI
appears on the display whenever the scanner is set to the pri-
ority mode.
To program a channel as the priority channel, press
PROGRAM
, the de-
sired channel number, then
PRIORITY
.
P
appears beside the channel
number.
To turn on the priority feature, press
PRIORITY
while the scanner is in
either manual or scan mode. To turn off the priority feature, press
PRI-
ORITY
until
PRI
disappears from the display.
Notes:
You can only select one channel at a time as the priority channel.
Channel 1 is initially set as the priority channel.
You cannot select a monitor memory when priority is turned on.