43
Use the following cleaning procedure after
about every 20 hours of operation.
1. Remove the batteries and disconnect
any other power source.
2. Open the cassette compartment door.
3. Use a pointed object to gently push
the erase protection tab sensor to the
left, then press REC to expose the
tape-handling parts.
4. Use a swab dipped in tape head
cleaning solution or denatured alcohol
to gently clean the tape-handling
parts. For easier cleaning, use an
microcassette cleaner kit which
includes a special cleaning cassette.
5. When you finish cleaning, press
STOP/EJ and close the compartment.