Filter
Top Products
10 DOMINION KSX USER MANUAL
Physical Connections
Back Panel of Dominion KSX
AC Power Line
Attach the included AC power cord to Dominion KSX and into an AC Power Outlet.
Network Port
Connect a standard Ethernet cable from the network port to an Ethernet switch, hub, or router.
Power Control Port (optional)
To employ Dominion KSX’s integrated power control graphical interface, connect a standard Cat5 Ethernet cable
from the port labeled “Power Control” to the equivalently labeled port found on a Raritan Remote Power Control
unit (p/n PCR8, PCS12, or PCS20).
Note
: This port works only with Raritan brand Remote Power Control units. You may use similar
products from other vendors by connecting them as a standard serial device. However, note that
Dominion KSX does not present a graphical interface to other vendors’ power control products,
only a standard command-line interface; Dominion KSX’s graphical power control interface
applies only to Raritan brand Remote Power Control units.