Filter
Top Products
Proprietary and Confidential
IBM Advanced Management Module Setup
This section describes the configuration required for the IBM BladeCenter Advanced
Management Module to integrate with Raritan’s Dominion KX II.
For the IBM BladeCenter, the Advanced Management Module (AMM) is supported. The older
Management Module has not been certified in this release. The KX II only supports auto-
discovery for AMM[1] as the acting primary management module.
The following IBM BladeCenter minimum AMM firmware is recommended:
Management Module Firmware
Main application: BPET36K
Released: 04-22-08
Name: CNETMNUS.PKT
Rev: 54
Under MM Control, access the Login Profiles to verify or create a user account for access from
the Dominion KX II.