Filter
Top Products
PARAGON II FAQS ONLINE 43
ERROR CODE
(LAST 4
DIGITS)
MEANING RECOMMENDATION
0007 – 0008 Memory allocation error. Reboot USTIP. Make sure the BIOS memory
test recognizes at least 64MB of RAM. If the
problem persists, restore the software and file
system from the Recovery CD-ROM.
0009 Could not find the frame
grabber card.
Power off the system and make sure the frame
grabber card is inserted firmly. If the problem
persists, there may be a problem with your
USTIP hardware.
000A Frame grabber card is not
responding correctly.
Power off the system and make sure the frame
grabber card is inserted firmly. If the problem
persists, there may be a problem with your
USTIP hardware.
000B Memory allocation error. Reboot USTIP. Make sure the BIOS memory
test recognizes at least 64MB of RAM. If the
problem persists, restore the software and file
system from the Recovery CD-ROM.
000C – 000F Memory allocation error. Reboot USTIP. Make sure the BIOS memory
test recognizes at least 64MB of RAM. If the
problem persists, restore the software and file
system from the Recovery CD-ROM.
0011 The Ethernet controller
could not be found.
There is a problem with the USTIP hardware.
0012 The modem could not be
found.
Power off the system and make sure the frame
grabber card is inserted firmly. If the problem
persists, there may be a problem with your
USTIP hardware.
0013 Memory allocation error. Reboot USTIP. Make sure the BIOS memory
test recognizes at least 64MB of RAM. If the
problem persists, restore the software and file
system from the Recovery CD-ROM.
0014 There is a problem with
the IP address.
Check the IP address configuration and reboot.
0015 The DHCP server did not
respond. USTIP could not
acquire an IP address.
Make sure your DHCP server is operating
correctly and then reboot USTIP.
0016 – 0019 There is a problem with
one of the USTIP startup
files.
Restore the software and file system from the
Recovery CD-ROM.
001A Error occurred while
initializing the UDP
socket.
Reboot USTIP. Make sure the BIOS memory
test recognizes at least 64MB of RAM. If the
problem persists, restore the software and file
system from the Recovery CD-ROM.
001B Error occurred while
initializing the TCP write
socket.
Reboot USTIP. Make sure the BIOS memory
test recognizes at least 64MB of RAM. If the
problem persists, restore the software and file
system from the Recovery CD-ROM.