Filter
Top Products
24 Pathfinder Radar Scanners
5. Referring to the following illustration, remove the securing nut
(1) from the watertight gland and grommet (2), where the inter-
unit cable (3) will enter the base.
1
11
1 Securing nut 2
22
2 Gland 3
33
3 Inter-unit cable 4
44
4 Eight-way plug 5
55
5 Eight-way socket 6
6 6
6 Power cores (2 or 4)
7
77
7 Terminal clamp 8
8 8
8 Screwdriver 9
9 9
9 Cable clamp 10
1010
10 Cable clamp screws 11
1111
11 Ferrite clamp
6. Slide the gland nut onto the inter-unit cable (3), and insert the
cable, still covered by its protective sleeve, through the gland into
the base.
7. Cut and remove the protective sleeve to expose the 8-way plug (4)
and power cores (6).
8. If the scanner is connected to an HSB Series Pathfinder Radar dis-
play, fit the ferrite clamp (11), supplied loose with the display
unit, as follows:
D3230-4
10
4
5
9
White wire
6
3
1
2
11
7
8
154_4.book Page 24 Wednesday, October 25, 2000 3:02 PM