Filter
Top Products
Recording Quality / Condition
EN
10
Setting Recording
Quality
You can select between three
recording qualities. Default is SP.
Definition
• SP(Standard Play) -
Model RP5030 allows
about 520 minutes
recording while model
RP5020 allows about
1040 recording
• LP (Long Play) -
Model RP5030 allows
about 1040 minutes
recording while model
RP5035 allows about
2080 minutes
recording
• HQ(High Quality) -
Model RP5030 allows
about 260 minutes
recording while model
RP5035 allows 520 minutes recording
1. Press MENU button three times,
(SP, LP or HQ show on display.)
2. Toggle between SP and HQ by
pressing REVERSE or FORWARD.
3. Confirm selection by pressing
MENU or STOP button.
Setting Recording
Condition
You can select between two
recording conditions. Default is DICT.
Definition
• CONF(Conference) - in a more open
area and recording source is far from
the unit.
• DICT(Dictation) - in a more
enclosed area and recording source is
close to the unit.
1. Press MENU two
times until DICT or
CONF show on display.
2. Select recording
condition by pressing
REVERSE or
FORWARD.
3. Confirm selection by
pressing MENU
button. (You may press
STOP to exit from
further selection.)
Tip:
For conferences, to obtain
optimum recording quality,
place the recorder with
the microphone freely exposed to the
sound source as close as convenient. A
built-in automatic recording level
control will set the optimum record
level during manual recording. Avoid
recording near unwanted noise
sources, such as air conditioners or
fans.
SP
LP
HQ
DICT
DICT
RP5030 EN(A ver.) 7/3/06 4:56 PM Page 15