Filter
Top Products
Setting the Time
EN
6
Year/Date/12/24/Time
Setting
With this function, you can always
read on the display the recording
date and time of your recorded
messages. Follow the steps below for
time setting.
You can still use this unit for normal
recording without setting the time.
However, no correct recording date
and time can be referred for your
recorded messages.
1. Turn on the unit.
2. Press MENU repeatedly to enter
Time setting mode.
3. When “YEAR” flashes, the digits of
the year blinks
(default is 2006).
Press REVERSEor
FORWARDto
increase/decrease
the number, press
MENU to confirm.
4. Once the year is entered , the digits
in the month field
will blink (default is
1). Press REVERSE
or FORWARD to
increase/decrease
the number, press
MENU to confirm.
5. Once the month is entered, the
digits in the day will blink(while
the digits in the month field stop
blinking). Press REVERSE or
FORWARDto increase/decrease
the number, press MENU to
confirm.
6. Once the date is
entered, you can
choose between
12/24 hour clock
display by pressing
REVERSE
/FORWARD, then
press MENU to confirm.
7. Once the time
format is entered,
the digits in the
hour field will blink
(default setting is 12
(12 hour mode) & 0
(24 hour mode). Press REVERSE or
FORWARDto increase/decrease
the number, press MENU to
confirm.
8. Once the hour field is entered, the
digits in the minute field will blink.
Press REVERSEor FORWARDto
increase/decrease the number,
press MENUto confirm.
Tip:
Press STOP to exit to
Stop mode.
MM
DD
AM
AM
RP5030 EN(A ver.) 7/3/06 4:56 PM Page 11