Filter
Top Products
Section 4 Notice
1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cable
head before inserting the cable head into the user system IC socket.
2. This user system interface cable is specifically designed for the HS3008EPI60H emulator. Do
not use this cable with any other emulator station.
3. To prevent breaking of wires in the cable body, do not place heavy or sharp metal objects on
the user system interface cable.
4. While the emulator station is connected to the user system with the user system interface cable,
force must not be applied to the cable head. Place the emulator station, user system interface
cable, and user system as shown in the example in figure 7.
11
User system
Emulator station
Place components so that the cable
body and cable head are parallel to the
user system.
Cable head is parallel
to emulator station
Cable head is parallel
to user system
Cable
Figure 8 User Cable Location Example
5. The P1 jumper is used for testing. Do not remove the inserted jumper pin.
Figure 9 P1 Jumper