Filter
Top Products
Fasten the user system interface cable head to the IC socket for an FP-100B/TFP-100B package on
the user system with the four screws (M2.6
x 12 mm; with four flat washers) provided. Each screw
should be tightened a little at a time, alternating between screws on opposing corners. Take special
care, such as manually securing the IC socket soldered area, to prevent the soldered IC socket from
being damaged by overtightening the screws or twisting the components.
Cable head
User system
Figure 3 Connecting User System Interface Cable to User System
7