Renesas H8/3007 Computer Hardware User Manual


 
7
Fasten the user system interface cable head to the IC socket for an FP-100B/TFP-100B package
on the user system with the four screws (M2.6
x 12 mm; with four flat washers) provided. Each
screw should be tightened a little at a time, alternating between screws on opposing corners. Take
special care, such as manually securing the IC socket soldered area, to prevent the soldered IC
socket from being damaged by overtightening the screws or twisting the components.
Pin 1
Cable head
IC socket
(IC149-100-054-B51
manufactured by
YAMAICHI ELECTRONICS Co., Ltd.)
User system
Screws (M2.6 x 12 mm)
with flat washers
Figure 3 Connecting User System Interface Cable to User System