Renesas H8S/2345 Series Computer Hardware User Manual


 
Fasten the user system interface cable head to the IC socket for an FP-100A package on the user
system with the two screws (M2.5
x 11 mm; with two flat washers) provided. Each screw should be
tightened a little at a time, alternating between screws on opposing corners. Take special care, such
as manually securing the IC socket soldered area, to prevent the soldered IC socket from being
damaged by overtightening the screws or twisting the components.
Cable head
User system
Figure 3 Connecting User System Interface Cable to User System
7