Renesas H8S/2678 Series Computer Hardware User Manual


 
Fasten the user system interface cable head to the IC socket for an FP-144G/FP-144H package on
the user system with the four screws (M2
x 12 mm; with four flat washers) provided. Each screw
should be tightened a little at a time, alternating between screws on opposing corners. Take special
care, such as manually securing the IC socket soldered area, to prevent the soldered IC socket from
being damaged by overtightening the screws or twisting the components.
Figure 3 Connecting User System Interface Cable to User System
7