Filter
Top Products
Section 2 Connection Procedures
Rev. 2.00 Sep. 08, 2008 Page 8 of 30
REJ10J1868-0200
2.2 Exchanging the Spacers of the Evaluation-Chip Board
After connecting the user system interface board to the user system, be careful not to apply load to
the user system.
Exchange the spacers (2.6MP × 10 mm) of the evaluation-chip board with the spacers (2.6MP × 25
mm) provided with the user system interface board and adjust the height.
Evaluation-chip board
Spacer
(2.6MP × 25 mm)
Figure 4 Exchanging the Spacers