Filter
Top Products
( 2 / 4 )
1. Outline
The M30100T-PTC is a converter board for M30100 Group
for connecting the pod probe M30100T-PRB to the foot
pattern for 0.8-mm-pitch QFP (32P6U-A).
2. Package Components (see Figure 1)
(1) M30100T-PTC converter board
(2) YQPACK032SA (made by Tokyo Eletech Corporation)
(3) NQPACK032SA (made by Tokyo Eletech Corporation)
(4) YQ-GUIDE (4 pieces)
(made by Tokyo Eletech Corporation)
(5) Screwdriver
(6) M30100T-PTC User's Manual (This manual)
3. Specifications
Table 1 Specifications
4. Usage (see Figure 2)
The M30100T-PTC can be used for debugging and board
mounted evaluation in common by mounting the
NQPACK032SA on the target board.
a. For debugging
Mount the NQPACK032SA and the YQPACK032SA in
that order on the foot pattern of the target board. Then
attach the YQ-GUIDE's to the YQPACK032SA to connect
the M30100T-PTC. Finally, connect the pod probe
M30100T-PRB to the M30100T-PTC.
b. For board-mounted evaluation
Mount the M30100 MCU and the HQPACK032SA (sepa-
rately available) in that order on the NQPACK032SA on
the target system.
Before using the M30100T-PTC, be sure to read "7. Precau-
tions" (page 4).
Figure 1 Package components of the M30100T-PTC
Figure 2 Usage of the M30100T-PTC
(1) M30100T-PTC
(4) YQ-GUIDE (x4) (5) Screwdriver
(2) YQPACK032SA (3) NQPACK032SA
Insertion/removal
iterations of
connector
32P6U-A
(32-pin 0.8-mm-pitch QFP)
20 times guaranteed
Applicable package