Filter
Top Products
( 10 / 36 )
Chapter 2. Preparation
2.1 Package Components
This product consists of the following items. When unpacking, check to see if your product package
contains all of these items.
Package components
Please keep the M30220T-PRB’s packing box and cushion material in your place for reuse at a later
time when sending your product for repair or other purposes. Always use these packing box and
cushion material when transporting the M30220T-PRB.
If any of these items are missing or found faulty, please contact your local distributor. Also, if there
is any question or doubt about the packaged product, contact your local distributor.
2.2 Other Tool Products Required for Development
To bring forward programs development on the M30220 and M30221 Group MCUs, the products
listed below are necessary in addition to those contained package above. Get them separately.
Other tool products
To purchase these products, contact your nearest distributer.
Emulator main unit
Emulation pod main unit
Emulator debugger
PC4701M, PC4701HS or PC4701L (essential)
M30200T-RPD-E (essential)
M3T-PD30 Ver.4.00 or later recommended (essential)
For 144-pin TQFP (144PFB-A): FLX-144NSE
(Converter board supporting the foot pattern of the target system)
For 120-pin LQFP (120P6R-A): FLX-120NSE
(Converter board supporting the foot pattern of the target system)
Converter board
Item
M30220T-PRB pod probe for M30220 and M30221 Group MCUs
FLX-144NSD converter board for 144-pin LQFP (144P6Q-A)
Screws for securing pod probe
M30220T-PRB User's Manual (this manual)
M30220T-PRB User's Manual (Japanese)
M30220T-PRB Repair Request Sheet (English)
M30220T-PRB Repair Request Sheet (Japanese)
Quantity
1
1
2
1
1
1
1