Filter
Top Products
( 4/4 )
7. Target Foot Pattern (See Figure 5)
Figure 5 Dimensions of the target foot pattern (Quoted from the specifications of IC socket for SSOP by Matsushita Electric Works, Ltd.)
8. Precautions
CAUTION
Cautions to Be Taken for This Product:
z Do not pull or excessively flex the cable. The cable may cause a break.
z Do not solder the M3T-SSOP42B-450 directly on the target. Use the included socket.
z When attaching the M3T-SSOP42B-450, be sure to confirm the pin positions.
z When soldering the socket's body and mounting the M3T-SSOP42B-450, refer to the supplementary document
"Mounting the Socket Included with the M3T-SSOP42B-450" and "Notes on Handling M3T-SSOP42B-450".
z Do not apply an unnecessary stress to the M3T-SSOP42B-450.
z Do not touch the pins of the M3T-SSOP42B-450.
z Store this product in the dedicated case.
IMPORTANT
Notes on This Product:
z We cannot accept any request for repair.
z To remove the socket frame, use the dedicated tool AXY89404201* (made by Matsushita Electric Works, Ltd.).
* To purchase this product and socket frame for repair, contact Matsushita Electric Works, Ltd.
z For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/en/tools
Unit: mm