Renesas M30280T-85LGF Computer Hardware User Manual


  Open as PDF
of 4
 
(4/4)
8. Precautions
CAUTION
Note on connecting to the user system
Caution is demanded, because attaching a converter board in the wrong direction may cause a fatal damage on the
emulator or the user system.
IMPORTANT
Notes on Handling This Product:
On the use of this product, prepare recommended foot pattern on the user system, and mount it with recommended
metal mask with diameter (φ0.35mm) and 0.15mm thick.
Create a hole for guide pin on the user system where CSSOKET085B1007RE01 is mounted.
The following show the recommended reflow conditions (surface temperature) for mounting
CSSOKET085B1007RE01, but the conditions are changed depending on size of the user system, or peripheral.
Lead free solder Eutectic solder
Pre-heat: 150 to 180°C, approx. 180sec. 150 to 180°C, approx. 180sec.
Heat: 240°C or higher, approx. 30 to 60sec. 210°C or higher, approx. 30 to 60sec.
Peak: 260°C 230°C
Notes on Connectors of the Converter Board:
The connectors of the emulator and M30290T-PTCB are guaranteed for up to 50 insertion/removal iterations.
The connectors of the M30280T-85LGF and CSSOCKET085B1007RE01 are guaranteed for up to 100
insertion/removal iterations.
Notes on This Product:
We cannot accept any request for repair.
For purchasing the CSSOCKET085B1007RE01, the CSSOCKET085B1007RE02 and the
LSPACK085B1007RE01, contact the following:
Tokyo Eletech Corporation http://www.tetc.co.jp/e_index.htm
For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/en/tools
 previous