Filter
Top Products
( 2 / 4 )
1. Outline
The M3062PT-80FPB is a converter board for connecting
the 160-core flexible cable FLX160 to a foot pattern for 80-
pin 0.65-mm-pitch QFP (80P6S-A).
2. Package Components (See Figure 1)
(1) M3062PT-80FPB converter board........................... 1
(2) YQPACK080SB (made by Tokyo Eletech Corporation) ..... 1
(3) NQPACK080SB (made by Tokyo Eletech Corporation) ..... 1
(4) YQ-GUIDE's (made by Tokyo Eletech Corporation) ............ 4
(5) M3062PT-80FPB User's Manual (this manual)
3. Specifications
Table 1 Specifications
4. Usage (See Figure 2)
The M3062PT-80FPB can be used for debugging and onboard
evaluation in common by mounting the NQPACK080SB on
the target system.
(1) For debugging
Mount the NQPACK080SB on the foot pattern of the
target system and attach the YQPACK080SB on it. And
connect the probe of the emulation pod to the upper
connectors of the M3062PT-80FPB. Then connect the
YQPACK080SB and the M3062PT-80FPB.
(2) For onboard evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK080SB (separately available)
in that order on the NQPACK080SB on the target system.
Before using the M3062PT-80FPB, be sure to read "7.
Precautions" on page 4.
Figure 1 Package components
Figure 2 Usage
M3062PT-80FPB
YQ-GUIDE's (x4)
YQPACK080SB
NQPACK080SB
Applicable package
Insertion/removal iterations of connector
80P6S-A (80-pin 0.65-mm-pitch QFP)
50 times guaranteed
(1) For debugging
(2) For onboard evaluation
M3062PT3-RPD-E
M3062NT3-RPD-E
M3062PT-EPB
M3062PT-80FPB
YQ-GUIDE's (x4)
YQPACK080SB
NQPACK080SB
80-pin 0.65-mm-pitch
(80P6S-A) foot pattern
MCU with on-chip flash
memory or one-time PROM
HQPACK080SB
(separately available)
: Position of No. 1 pin
Be sure to align the pins.